The latest SANYO optical engine, called QuaDrive, adds a Color Control Device to conventional 3LCD (red/green/blue) systems. The first projector to launch this innovative new QuaDrive engine is the PLC-XP200L. The additional Color Control Device in the QuaDrive optical engine allows the PLC-XP200L to automatically control the amount of yellow light in the image, producing higher luminosity with improved color accuracy and clarity.
The demand for even brighter projectors continues to come from the field as systems integrators are asked to install video displays in extremely large venues such as convention halls, conference rooms, auditoriums and houses of worship. However, as brightness levels increase on 3LCD projectors, there is a reverse effect in color reproduction. Colors become noticeably washed out, lacking vibrancy and realism.
SANYO's innovative solution overcomes the limitations of 3LCD technology, opening the way for new projectors capable of extremely high luminosity without the trade off in color accuracy. The PLC-XP200L, the first projector to benefit from this new technology, is rated at an amazing 7000 lumens. Coupled with the impressive high contrast ratio of 2200:1, the PLC-XP200L is capable of generating clearer, richer and more beautiful images than was ever possible with high brightness 3LCD projectors.
SANYO developed a new high-speed image compensating LSI for the QuaDrive engine. The combination of this engine and the new LSI allows for up to 20% more color space than our conventional projectors. With the controlled yellow light, SANYO’s Advanced Color Correction technology separates each color histogram for unparalleled color processing and correction, resulting in beautiful and naturally rich colors.
Additionally, the PLC-XP200L is equipped with a high-output, single lamp that is designed for exceptional light efficiency. Aside from generating sharper and brighter displays in large halls and meeting rooms, the 4LCD design is well suited for digital signage and advertising in brightly lit environments.
Minimal maintenance and repair was essential for the XP200L, so it was outfitted with SANYO’s exclusive Active Maintenance Filter (AMF). AMF is a single filter cartridge that contains ten lengths of filtering material plus an airflow sensor to detect when airflow is obstructed by dust. The AMF system automatically advances a clean section of filter when needed. When the last section of filter material becomes obstructed an on-screen graphic appears telling the user to change the cartridge. Each filter lasts approximately 10,000 hours with a cartridge lifecycle of about 2 years (calculation based on 14 hrs/day projector use). The filters are easy to replace due to the side loading access on the projector. To further increase reliability and performance, the PLC-XP200L uses SANYO's unique Durable Inorganic Optical System (DIOS).
The SANYO PJ-NET ORGANIZER is available, allowing the PLC-XP200L to be connected to a wired network via Ethernet. Using the PJ-NET MASTER software all projector functions such as power status, lamp status, input mode, signal condition, lamp-use time, etc. can be monitored and controlled from a remote location.
For quick and easy installation the XP200L is outfitted with a motor driven vertical and horizontal lens shift. Up/Down/Left/Right lens shift ensures image projection at any angle of up to 360-degrees, allowing ceiling or floor image projection.
A special mechanical shutter is also placed behind the lens and activated by the remote control, allowing the presenter to close the lens and temporarily darken the screen.
- World's First QuaDrive Optical Engine
- True XGA (1024 x 768) Resolution for Clearer, Richer Images
- 7000 ANSI Lumens of Brightness
- High 2200:1 Contrast Ratio
- Active Maintenance Filter (AMF) for Easy Maintenance, the Industry's Longest Lasting Filter
- Network Connectivity
- Built-in Mechanical Shutter
- Wired/Wireless I/R Remote Control w/Mouse Pad Included
- Lens sold Separately
|
Specifications
|
| Model number |
PLC-XP200L |
| System |
RGB liquid crystal shutter protection system |
| LCD panel |
Size |
1.3 inch x 3, Aspect Ratio 4:3 |
| Number of pixels |
786,432 (1024 x 768) x 3 ; Total pixels 2,359,296 |
| Color Control Device |
Built-in x 1 |
| Projection Lens |
Sold Separately |
| Light source |
330 W NSHA |
Screen Size
(Projection Distance) |
31 to 400 inches (projection distance differs by lens) |
| Color Reproducibility |
Full color (1.07 billion colors) *when in using with video |
| Brightness*1 |
7,000 ANSI lumens |
| Uniformity*1 |
90 % |
Contrast ratio*1
(Full On/Full Off) |
2200:1*2 |
| Scanning Frequency |
Horizontal: 15-100KHz, Vertical: 48-100Hz, Dot Clock: 180 MHz or less |
| Displayable Resolution |
RGB Signal |
1024 x 768 dots (1920 x 1080 resizing display possible) |
| Video Signal |
800 TV |
| Computer Input/Output |
Digital DVI-I x 1 (HDCP Compatible)
Analog RGB input x 2; Mini D-sub 15-pin, BNC input 5-pin |
| Video Input |
Video input x 3;
BNC terminal (Y/Video-Pb/Cb-Pr/Cr)
RCA terminal (Y/Video-Pb/Cb-Pr/Cr)
S-video |
| Video Output |
Analog RGB x 1; Mini D-sub 15-pin*3 |
| Audio Input/Output |
Input: Stereo mini-jack x 2
Output: Stereo mini-jack |
| Control Ports, etc. |
Control port: D-sub 9 pin; USB type B*4
Wired remote control connection
PJ Net Organizer connector |
| Operating Temperature |
5 - 40? |
| Power Source |
100 -120V / 200 - 240V AC , 50/60Hz |
| Power Consumption |
499W (Standby:24.5W) |
| Dimensions (W x H x D) |
370.0 x 187.0 x 439.9 mm(including protruding parts) |
| Weight |
11.4kg (without lens) |
| Main Accessories |
|
Wireless remote control (AAA battery x 2)
Removable power cord
Back-up power adapter
USB cable
Mini D-sub 15-pin connecting cable
Operating manual
|
|
Customer service contact list
Warranty
PIN code label
Lens mounting hardware
Light-shade plate x 2
Spacer x 3
|
|
|
|
