Introducing the PLC-XW250 and the PLC-XW200 – that offer educators outstanding cost performance with an eco stand-by power mode that uses a mere 0.4 watts and their exclusive “Easy Setup Function”. These projectors are extremely easy to operate and offer advanced features such as wired LAN management – making them perfect for educators.

Using a mere 0.4 watts, the PLC-XW250 and the PLC-XW200 are SANYO's most ecological data projectors. The eco power stand-by mode saves about 80% of the energy that is consumed by similar previous SANYO projectors*. By redesigning the electrical circuits, these two projectors are able to comply with the EuP-Directive Lot 6 and the EU RoHS Directive. As an additional environmental measure, all the packaging contains pulp molds, which can be recycled as used paper.

Both projectors incorporate SANYO's latest “Easy Setup Function”, which include Auto Input Signal Search, Auto Vertical Keystone Correction, and an Input Guidance Function. The Auto Input Signal Search automatically detects the input signal and makes the necessary internal settings. The Auto Vertical Keystone Correction function automatically detects its position angle and corrects for any image distortion. And finally, the Guidance Function displays on-screen connection instructions when there is no input signal detected, enabling easy setup for expert users and novices alike.

Using the supplied wired LAN terminal (RJ-45), the PLC-XW250 and PLC-XW200 can be controlled and managed via network connection. The LAN connection offers settings for power on/off, switching input signals, projecting from a remote location, as well as for monitoring lamp conditions and usage time. An automatic maintenance notification function sends notices to preset email addresses in the event of projector problems, resulting in faster maintenance response time. Using SANYO’s PJ Network Manager software, it's possible to centrally monitor operating conditions of up to 200 projectors on a single network, reducing multiple projector management time.

Specifications
Model name		PLC-XW250	PLC-XW200
Panels		0.55-inch TFT p-Si x 3
No. of pixels		2,359,296 (1024 x 768 dots)
Projection lamp		220 W UHP
Brightness*1		2600 lm	2200 lm
Contrast*1		500 : 1 (Lamp mode: "High" & Image mode: "Dynamic")
Uniformity*1		85% (corner to center)
Projection lens		F2.0 - 2.15, f= 18.38 - 22.06 mm(0.72 - 0.87 inch)
Screen size		40" - 300", 1.3 m(wide)-11.8 m (tele)(4.3 - 3.87 ft), U:D = 6:1
Zoom / Focus		100" at 3.3 m - 3.9 m(10.8 - 12.8 ft),1 : 1.2 Manual driven
SD/HDTV signals		480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
Color systems		PAL / SECAM/ NTSC / NTSC4.43 / PAL-M/N
Video Signal		Composite, S-Video, Component
Computer Terminals		D-sub 15 x 1 : Analog RGB Input (Component and S-video input with conversion cable) D-sub 15 x 1 : Analog RGB Input or Monitor out*2
Video terminals		RCA x 1 ; Composite video
Computer compatibility		UXGA / WXGA / SXGA+ / SXGA / XGA / SVGA / VGA / MAC
Audio		Mini-Jack (stereo) x 1 : Input (for Computer & Video) Mini-Jack (stereo) x 1 : Output(variable audio out)
Communication Terminals		RJ-45(LAN) D-sub 9pin (RS 232C)
Presentation Tools		Freeze / Digital Zoom / No Show / etc.
Other Features		Progressive, 3-2 & 2-2 pull down, User Logo
Scanning frequency		H sync: 15 - 100 kHz, V sync: 50 -100 Hz, Dot clock: 140 MHz
Sound output		1.0W Mono
Fan Noize		29dBA (Lamp mode "Eco")
Voltage		AC 100 - 120V, AC200 - 240V, 50/60Hz
Power consumption	100-120 V	213 W / 273 W / 296 W (Eco / Normal / High)	212 W / 229 W / 272 W (Eco / Normal / High)
	200-240 V	205 W / 260 W / 280 W (Eco / Normal / High)	203 W / 229 W / 259 W (Eco / Normal / High)
Standby power consumption		100-120 V 0.4 W (Standby mode: Eco) 200-240 V 0.7 W (Standby mode: Eco)
Dimensions (not including protruding parts)		W333.5 x H85.2 x D247.0 mm (H13.1 x H3.4 x D9.7 inch)
Weight		2.5 kg (5.5lbs)
Accessory		Quick reference guide, Owners's manual (CD-ROM),CD-ROM read me note, CD-ROM(PJ-Net Manager application software), PIN code Label, Lamp replacement label,UL cable card, Power cord, Computer cable(Dsub15 - Dsub15), Remote control, AAA Battery x 2, Lens cap, Strap for lens cap